Miata 1990-2005: Gauges

Thompson Gauge Panel, THREE GAUGE HOLES. :: 1999-2005

The DIN slot above or below your single DIN radio is the perfect spot to put REAL gauges, but until now there just hasn't been a high-quality gauge panel that fit properly. Now there is... Designed specifically to fit NB Miatas (1999 to 2005), but recently discovered to also fit some 1996 and all 1997 cars. It snaps into place and matches the other items in your console EXACTLY.

Customers who bought Thompson Gauge Panel, THREE GAUGE HOLES. :: 1999-2005 also often bought:
	RoadsterSport 3 Polished Stainless Steel Miata Exhaust Muffler -- SALE!::99-05 This Miata exhaust muffler is our favorite. Deep mellow tones flow from our favorite Miata exhaust muffler choice...and this Miata exhaust muffler is the ONLY 99-05 Miata exhaust with an optional highflow midpipe with built in converter and... More Info
	AEM 52mm Black Face Analog Wideband Air/Fuel Gauge AEM s wideband air/fuel gauge unites unsurpassed accuracy, speed and control with an easy to read, analog interface. The AEM wideband also offers a 0-5v analog output for use with data loggers and virtually any engine management system, such as the AEM... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton