Miata 1990-2005: Roll Bars : Hard Dog

Vinyl Cover for Harddog Miata Roll Bars WITH Custom Formed High Density Padding :: 90-05

If you have a Hard Dog Miata Roll Bar and want a vinyl cover, here it is. Price includes high denisty pad to protect your head. Cover fits over the pad and your bar. Comes in black only. IF buying this with purchase of the rollbar we will make sure you get the correct one BUT if you already have the rollbar please mail us which model Hard Dog Miata Roll Bar you have so we can send the correct cover and pad.

Customers who bought Vinyl Cover for Harddog Miata Roll Bars WITH Custom Formed High Density Padding :: 90-05 also often bought:
	Hard Bar - Black Miata Roll Bar::90-05 Selecting a Miata Rollbar means consideration of numerous factors including ease of use. This Hard Bar for Miata is very easy to live with and raising and lowering your Miata's top is very easy with this bar, in fact easier with this bar than any other... More Info
	Hard Dog M2 Sport Black Powdercoat with NO DIAGONAL::90-05 Picture shows OPTIONAL diagonal but here you are ordering just the four point bar without that diagonal. The M2 Sport Bar uses the same main hoop mounting system as the original Hard Bar Sport. The redesigned rear braces allow room for the '99 + M2 Mazda... More Info
	Hard Dog M2 Sport Black Powdercoat W/ DOUBLE Diagonal::90-05 The M2 Sport Bar uses the same main hoop mounting system as the original Hard Bar Sport. The redesigned rear braces allow room for the '99 + M2 Mazda glass rear window. The M2 Sport will also fit the '90-'97 M1. The non diagonal version is compatible... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton