Miata 1990-2005: Roll Bars : Hard Dog

Black Vinyl Cover ONLY :: 90-05

If you have a Hard Dog Miata Roll Bar AND you bought a CPAD and now want the cover, here it is... Please include in the comment section of your order WHICH HARDDOG ROLLBAR YOU HAVE!

Customers who bought Black Vinyl Cover ONLY :: 90-05 also often bought:
	Rollbar SFI rated molded pad Specifically designed by the folks at Hard Dog to fit their Miata Roll Bars...but it also fits our Autopower Miata Rollbars. Cover is made from Custom molded SFI approved high density material. Installs with automotive grade velcro for easy removal and... More Info
	Trunk Lift Kit::90-04 You've got two hands full of stuff, a third hand to manipulate the key and a fourth hand to lift the trunk lid. Eliminate two of those hands with our custom gas strut trunk lift. Comes complete with all necessary hardware. Now when you turn the key, the... More Info
	Ground Control Miata Coilover Conversion 700/350::90-97 Adjustable coil-overs allow easy adjustment of Miata ride height and the ability to adjust the weight at each corner. With this simple sleeve design, any shock can now be a race ready coil-over. Ride height is adjustable from stock to 2" lower and... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton