Miata 1990-2005: Roll Bars : Hard Dog

Hardog ACE Miata Roll Bar--Black Harness bar IN REAR HOOP...

Add a harness bar to your order for a ACE roll bar in the REAR HOOP (Picture accurate).

Customers who bought Hardog ACE Miata Roll Bar--Black Harness bar IN REAR HOOP... also often bought:
	Racing Beat Rear Miata Sway Bar - Solid ALL years Our favorite Miata sway bar....Racing Beat-designed Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel... More Info
	NEW Hard Dog ACE Miata Roll Bar---Black Powdercoat Side Braced Main Hoop Single Diagonal, no harness bar. The Ace, Hard Dog's response to popular demand for a traditional Miata roll bar designed with more rearward placement for better head clearance that doesn't interfere with the stock seat belts. The flexibility of this design allows us to offer this... More Info
	NEW Hard Dog ACE Miata Roll Bar--Black Powdercoat Side Braced Main Hoop Double Diagonals, no harness bar The Ace, Hard Dog's response to popular demand for a traditional Miata roll bar designed with more rearward placement for better head clearance that doesn't interfere with the stock seat belts. The flexibility of this design allows us to offer this... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton