Miata 1990-2005: Roll Bars : Hard Dog

Hardog ACE Miata Roll Bar--Diagonal(s) to rearward braces (black). This configuration not compatible with glass rear window soft tops

Change ACE Miata Rollbar order configuration to have diagonals connect to the rear down braces instead of within the front hoop. This is NOT a rollbar order...this is a change order for alternative configuration.

Customers who bought Hardog ACE Miata Roll Bar--Diagonal(s) to rearward braces (black). This configuration not compatible with glass rear window soft tops also often bought:
	NEW Hard Dog ACE Miata Roll Bar--Black Powdercoat Side Braced Main Hoop Double Diagonals, no harness bar The Ace, Hard Dog's response to popular demand for a traditional Miata roll bar designed with more rearward placement for better head clearance that doesn't interfere with the stock seat belts. The flexibility of this design allows us to offer this... More Info
	Horizontal Slat Grille - Silver::90-97 Give your Miata a more aggressive look with our slat grille. Slats are CNC machined from mild steel for a perfect it, our grille is then powder coated for a long lasting finish. Specifically designed to be strong yet allow maximum airflow to your... More Info
	Dual Headlamp System LHD::90-97 A high quality Miata dual headlamp kit that incorporates the features you need but eliminates the weaknesses of the products previously available. The result is the finest dual headlamp system available for the Miata with no compromises. Take a look at... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton