Miata 1990-2005: Roll Bars : Boss Frog

Bolt in Harness Bar for BossFrog Rollbars in BLACK

Fits all Boss Frog bars (double, single, standard and Maxx), and is powdercoated black. Shipping will be flat rate $25 in the continental USA (our store can't make that happen automatically but we will fix all orders to this flat rate). Please email us for quote on international shipment.

Customers who bought Bolt in Harness Bar for BossFrog Rollbars in BLACK also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	SFI rated pad, Boss Frog Clearview Good idea to protect your head with an SFI rated pad that is molded to fit your Boss Frog Clearview. Note that pads should be covered because UV light degrades them. More Info
	Clearview Vinyl Cover for SFI Padding Vinyl Covers for Clearview SFI padding - these covers are the same material and design as the double hoop covers, except there is velcro closures instead of zippers. Because of slight variations in the location of the brace bars, these covers may require... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton