MX5 2006-2012: Suspension : Coilovers

Swift Race Springs Z65-178-110.

pair of 7 inch, 2.5 inch diameter, 11k Swift springs, p/n Z65-178-110

Customers who bought Swift Race Springs Z65-178-110. also often bought:
	Konig Rewind 40mm Graphite--15x7, 40mm... SALE! Finally Here! We asked and begged Konig to make us a version of this classic style wheel in a Miata offset and 15x7. See great pictures of these on a new MazdaSpeed Miata and other Miatas in our wheel gallery in our forum. Remember to order hubcentric... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	McGard Spline Drive Tool This is the tool for McGard Spline Drive lugs. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton