MX5 2006-2012: Exhaust

RoadsterSport "Q" Stainless Steel Premium MX5 Miata Exhaust----APPEARANCE PACKAGE Extended Length Version :: 2006-2012


RoadsterSport "Q" Stainless Steel Premium MX5 Miata Exhaust----APPEARANCE PACKAGE Extended Length Version
Part Number: 61-0115-ET
Application: 2006-2012
Price: $409.00
Quantity:
Our Best MX5 Exhaust...this version is only for the cars with Appearance package (see PICTURES of factory appearance package cars bottom of the page)...tips are extended 1.5 inches to properly fit the MX5 factory Appearance Package lower rear valance. Look at those pictures carefully, all too many people think they have 'all the options' on their Grand Touring MX5 but in reality they usually do NOT have the appearance package. If you don't see that extra body seam across the lower rear bumper shown on the white and green MX5 below, you do NOT have the appearance package. As shown on the green car below, the factory exhaust is over 2.5 inches submerged when appearance package is on the car.

We make THREE exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, our best selling RoadsterSport II Duals, and now this Premium duals unit we affectionately call the RoadsterSport Q. This unit is the most mild...about 10 to 15% louder than stock on an otherwise stock NC...with a deep burble. This unit was designed with the sound absorbing ability to handle future mods including the massive sound gain caused by a header change (either our RoadsterSport header or our Racing Beat header).

Removing the factory header means removing the first catalytic converter which is also a very large resonator. The result of the header change is a massive amount of additional sound down the exhaust tubes. Developing a muffler that could both deliver all the flow of our other RoadsterSport designs yet swallow the sound unleashed by the header was a challenge. The factory muffler does an okay job with the sound from a header change but at the cost of flow and a giving back of much of the hard fought horsepower gains of the header change. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....all the flow, without all the noise!

Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.

BRIAN's APPLICATION NOTES: Perfect choice for anyone planning future upgrades such as a header change or supercharger. Also a good choice for those looking for a more than stock but still mellow sounding choice in exhaust upgrades. Finished in three inch tips which INCLUDE our exclusive baffle cone inserts which are REMOVEABLE and allow you to set the sound to sporty...or quiet. Also available are optional packed baffles (see separate product description) with which you can quiet it down even more for those using a header or supercharger, or race midpipe, etc.

This system is 10% louder than the stock muffler on an otherwise stock MX5 exhaust system....and only about 20 to 25%% over stock sound level when used with our complete 2.5 inch RoadsterSport header and 2.5 inch RoadsterSport midpipe. Baffles are retained by small hex bolts inserted from well under each tip. Installation of this Miata exhaust is SUPER EASY...just two bolts! You don't even need to jack up the car, this installation can be done in your driveway! This Miata exhaust is guaranteed for as long as you own your Miata. Proudly made in the USA with a LIFETIME WARRANTY. Fits all 2006 and newer with manual transmission MX5 Miata, automatic transmission MX5 Miata, and retractable hardtop MX5 Miata!

BRIAN'S CONCLUSION: This is the choice on my own MX5 for driving around town...and my strong recommendation for anybody wanting an exhaust with a super smooth burble. This is also our top recommendation for owners of the automatic transmission.

Note Pictures below showing FACTORY appearance package with FACTORY exhaust tip...if you want the exhaust tucked in that far then order our regular version but if you don't want the tips so far under then order our Appearance package version.

SOUND Files at our Exhaust Blog---CLICK HERE TO LISTEN AND READ MORE.

;


Customers who bought RoadsterSport "Q" Stainless Steel Premium MX5 Miata Exhaust----APPEARANCE PACKAGE Extended Length Version :: 2006-2012 also often bought:

HEADER INSTALLATION LONG extension cord for second O2 Sensor....for use ONLY when installing header into Miata already using ROADSTERSPORT MIDPIPE. HEADER INSTALLATION LONG extension cord for second O2 Sensor....for use ONLY when installing header into Miata already using ROADSTERSPORT MIDPIPE.
This is an option for the RoadsterSport header and Racing Beat Header to allow relocation of your second factory O2 sensor to a position after the converter in a RoadsterSport midpipe that so your installation is easy PLUG AND PLAY. Note that the plugs... More Info
HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header. HEADER INSTALLATION Short extension cord for prime/trim O2 Sensor...for use ONLY when installing RoadsterSport header.
This is a recommended option for the RoadsterSport header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will run the safe default map which is overly rich. ... More Info
RoadsterSport Stainless MX5 Miata Midpipe::06-12 RoadsterSport Stainless MX5 Miata Midpipe::06-12
Designed to work with our RoadsterSport Duals or RoadsterSport Race muffler as a simple bolt on (will also bolt up to our Racing Beat exhaust, MazdaSpeed exhausts, and all headers that we sell etc.).

Our midpipe gains 5 to 8 Ft/Lbs of torque from 3500... More Info

Customer Reviews: RoadsterSport "Q" Stainless Steel Premium MX5 Miata Exhaust----APPEARANCE PACKAGE Extended Length Version :: 2006-2012

Want to Review This Product?
(You must be a previous customer of Good-Win-Racing or registered member of our MazdaTalkForum.)

Sign Up for our Newsletter
Mazda Talk Forums

Installation Instructions

Re: NC Rollbar Installation

Brian wrote:Looking sharp, will get that trim piece your direction to finish it off.Tks Brian.Let me know on email when it ships out, thanks...
Posted by pdxa4

Re: NC Rollbar Installation

JonU wrote:Really nice work. BTW, what seat covers are those?Tks,They are Wet Okole's...
Posted by pdxa4

Re: NC Rollbar Installation

Really nice work. BTW, what seat covers are those?
Posted by JonU

Re: NC Rollbar Installation

Gorgeous in silver!!! Making me rethink the black one. Well done.
Posted by rpmchris

Re: NC Rollbar Installation

Looking sharp, will get that trim piece your direction to finish it off.
Posted by Brian

Mazda Talk Forum
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Click Model Year
Miata 1990-2005
MX5 2006-2012
RX8 2004-2011
Mazda6 2003-2012
RX7 1979-1995
Mazda3 2005-2012
Mazda2 2012
Home About Us Customer Care Technical FAQs Mazda Talk Forums Contact Us
Good-Win Racing Mazda Performance Parts