Miata 1990-2005: Wheels and Tires : Wheels

Team Dynamics Pro Race ONE 15x7, 35mm, 4x100 SPEC MIATA SUPER CLEARANCE....GLITTER SILVER

This is a special clearance of the classic Spec Miata racing wheel we have sold for years. After these are gone it will be nothing but the newer Pro 1.2. We will NOT mount tires on these....for this clearance we just slap a ship label on the box and off they go to you. File photo....wheels are 4x100 bolt pattern and 54mm hub bores...made for the Miata. A little over 13 pounds for Spec Miata. JUST TWO OF THIS FINISH LEFT!!

Customers who bought Team Dynamics Pro Race ONE 15x7, 35mm, 4x100 SPEC MIATA SUPER CLEARANCE....GLITTER SILVER also often bought:
	ENKEI RP-F1 15x7-Silver 35mm offset Nothing beats this Enkei RPF1 for quality, light weight and price. Fits Miata, and many Hondas and Toyotas that share the 4x100 bolt pattern. These are a personal favorite on the Miata for their combination of great quality, great finish, strength,... More Info
	Complete Upgraded Motor Mount- 88 Durometer Pair::94-00 For the serious Miata performance enthusiast we bring you polyurethane motor bushings for the NA and NB Mazda Miata MX5 in substantially upgraded mounts. The stock Miata soft engine mounts allow a great deal of motor movement...so much that autocrossers... More Info
	Gates Miata Performance Timing Belt::90-05 Gates Racing High Performance Miata Timing Belts are incredibly strong and extremely heat resistant. Tough enough to take the worst pummeling your engine can dish out. No other Miata timing belt helps protect your engine and deliver high performance... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton