RX8 2004-2011: Interior

Autopower RX8 Street SPORT Roll Bar. :: 04-08

This is the standard Mazda RX8 Autopower Rollbar with an added bolt-in harness bar so you can use a harness in your RX8.

FITMENT NOTE: Please tell us if you have a SUNROOF at the time of order.

Customers who bought Autopower RX8 Street SPORT Roll Bar. :: 04-08 also often bought:
	Wilwood Brake Fluid::All Wilwood 570 Degree Brake Fluid,Wilwood's specially formulated Hi-Temp_ 570 Racing Brake Fluid has a minimum 570_ F dry bOiling point to withstand the severe heat requirements of automotive racing. Hi-Temp_ 570's low viscosity allows easy bleeding of your... More Info
	Hawk HB378E.565 HP PLUS Brake Pad Set - REAR We offer HAWK BRAKE streetable and race-application brake pads for a variety of Mazda applications. HAWK BRAKE S Ferro-Carbon semi-metallic brake pad compounds offer high torque, low wear, and excellent rotor life, while exhibiting predictable performance... More Info
	Hawk HP Plus Brake Pad Set - Front SALE We offer HAWK BRAKE streetable and race-application brake pads for a variety of Mazda applications. HAWK BRAKE S Ferro-Carbon semi-metallic brake pad compounds offer high torque, low wear, and excellent rotor life, while exhibiting predictable... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton