Good-Win Racing Mazda Performance Parts

Autopower RX8 Roll Bar - RACE

2004-2011

RX8 2004-2011 · Interior


Part Number: 61-0179

Application: 2004-2011

Price: $504.00

Quantity:

Autopower RX8 Roll Bar - RACE
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

Race roll bars are made with 1.750 x .120 DOM steel. The Race roll bar is designed for solo, autocross and high speed time trials. All Race roll bars have a diagonal cross brace and have a harness tube. AUTOPOWER INDUSTRIES manufactures a variety of roll bars and roll cages for street vehicles and all out race cars. Every roll bar or cage has been designed to fit specific car models so only minor modifications are necessary for the installation. Most applications are a true bolt-in and require NO WELDING. A great amount of time has gone into developing and perfecting each product to offer the utmost in strength and proper fit. This FULL RACE bolt-in Mazda RX8 roll bar is built to order which usually takes about 4 weeks from date of order. FITMENT NOTE: Please let us know if you have a SUNROOF.

SHIPPING IS NOW TRUCK FREIGHT COD....expect ship costs range from $150 or more depending on location, we will refund shipping charged by our store. Autopower applies a basic black spray paint that they consider little more than rust preventative, but the good news is that it makes touch up is easy with just standard rattle can gloss black. Diagram is the general diagram provided by Autopower and not an actual picture of this bar.

*** Product images may differ from actual product appearance ***

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

I received the Roadstersport II, and I wanted to compliment you guys on an awesome product. The Miata should have these on from the factory. They make a great sound, that is not obnoxious at all. The exhaust also installed seamlessly!!! I will buy all of my Miata stuff from you in the future. Thanks,

-- Nate