Good-Win Racing Mazda Performance Parts

Konig Daylite 15x6.5 - Gold

1990-2005 · 15x6.5

Open Box - ONE Left

Miata 1990-2005 · Bargain-Bin


Part Number: 61-0187BB

Year: 1990-2005

Application: 15x6.5

Price: $79.00

Quantity:

Konig Daylite 15x6.5 - Gold
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

We found one of these Konig Daylites in the back of the warehouse, so we're clearing it out. This is a discontinued wheel. Price is for ONE wheel, and there is only one available. This wheel is brand new, but has a small 1/16" size ding in the lip from handling as shown in the photos.

Size: 15" x 6.5"
Offset: 40mm
Lug pattern: 4x100
Color: Gold
Center cap included

Our original Konig Lightspeed product notes:
The Daylite is another great low weight Miata wheel from Konig. Same offset as the factory uses for all 15 inch Miata alloys, 40mm.

This is a great Miata street wheel in terms of lightness for the price. Clear coat over powder coat. Price includes center caps. YES, this wheel fits ALL years and packages of Miata from 1990 through 2005. Takes a standard 73/54 hubcentric ring also available on this website.

Stock lugs are a tight fit, we strongly recommend a narrow extended length lug such as our spline drive lugs.

*** Product images may differ from actual product appearance ***

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

I received the Roadstersport II, and I wanted to compliment you guys on an awesome product. The Miata should have these on from the factory. They make a great sound, that is not obnoxious at all. The exhaust also installed seamlessly!!! I will buy all of my Miata stuff from you in the future. Thanks,

-- Nate