KONI STR-T Mazda 3 Performance Replacement Shocks, Full Set

DESCRIPTION

These Koni Orange Replacement Shocks are Non-adjustable replacements for your stock shocks. They are an upgrade over the stock shocks, providing a slightly firmer ride and superior control with Koni quality and lifetime warranty.

These "STR.T-Street Shocks" are Koni's entry level performance shock absorber designed as a perfect OE replacement with stock springs or for Mazda3 improvement with a mild lowering spring such as our Racing Beat street springs. * Non-adjustable * Lifetime Warranty * The most affordable KONIs.

Does NOT fit Mazdaspeed3.

These are a twin tube low pressure nitrogen gas design. When compared to a brand new factory shock these tend to ride a little bit lower when compared to new factory high pressure shocks. Compared to brand new factory shocks these Koni typically ride at least half an inch lower because of the low pressure design (part of the reason KONI are popular with our autocross customers is gain of negative camber from that lowering in classes where factory height springs are required). But old leaking factory shocks suffer loss of pressure over time and your ride height on old shocks may already be much lower than the car was originally from the factory. Thus, despite Koni shocks generally giving slightly lower heights than new factory shocks, we have seen cases where folks replace their old tired shocks and the result is an increase in ride height because their original shocks were so far gone. Consequently, whether you will see a change in ride height with the installation of Koni shocks is not something we can get too precise about because the answer depends on the condition of the shocks in the car that you are replacing.