Miata 1990-2005: Wheels and Tires : Wheels

6UL 15x8 pcd 4x100 Silver +36

SORRY, SOLD OUT

From our friends at 949 Racing comes this lightweight 12.6 lb race wheel, one piece cast construction. Clears all factory Miata brakes and our BIG BRAKES.

*Double valve design
* Silver painted center
* machined lip
* durable clear coated finish
* JWL approved
* Fits 205/50/ 225/45, 225/50, 245/40
* Cap included
* Valves not included
* Takes a standard 67/54 hubcentric ring available as optional extra on this website.

Customers who bought 6UL 15x8 pcd 4x100 Silver +36 also often bought:
	Silver anodized aluminum valves for 6UL wheels Lightweight CNC aluminum alloy valves. These are top nut style to protect the valve from being damaged or unthreaded during mounting of stiff race tires. Less than half the weight of steel valves. Will not rust. Silver anodized, matches the lip of the... More Info
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. A Miata takes 16 of these and... More Info
	Racing Beat Front Miata Sway Bar - Tubular::94-97 Our first choice in Miata sway bars....Racing Beat-designed Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum cornering power. One of the first steps that a Miata... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton