PART NUMBER: 61-0227b
Hot brakes are poor performing brakes. Full-out racing or just amateur track days will suffer unless proper brake cooling is installed, but maximizing air flow and minimizing conflict with suspension components and other space constraints are tough to balance.
We sell the individual bits separately, but here are you getting the full kit that includes everything you need to fit a professionally built cooling system to your MX-5 Miata front brakes.
This kit includes:
- Bumper inlet ducts for 2013-2015 MX5 bumper
- High temperature 2.5" brake duct hose
- Outlet ducts that mount to the hub
- Hose clamps
Made to order, can take up to 2 weeks before shipping so order plan ahead! Order long in advance, do not wait until the last minute to order if you need these for a race.
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015 · 17x9
MIATA MX5-NC 2006-2015
MIATA MX5-NC 2006-2015
The kit was as expected and Goodwin is always great to work with. No fitment issues. The only challenge was removing the hubs. They were nicely seized onto the knuckle. I used two 35mm long M12x1.25 bolts/nuts and a short 1/2 inch socket to push the hub off of the knuckle and I used an impact extractor to help it along.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)