Good-Win Racing Mazda Performance Parts

DynaPro SIX PISTON Matched Caliper PAIR RETROFIT KIT

1990-2005

Miata 1990-2005 · Brakes · Brake Kits and Complete Packages


Part Number: 61-0306

Application: 1990-2005

Price: $598.00

Quantity:

DynaPro SIX PISTON Matched Caliper PAIR RETROFIT KIT
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

This pair of Calipers is for those of you who ALREADY OWN OUR MIATA BIG BRAKE KIT and want to retrofit it with our new 6 piston calipers!

***The front calipers in this kit use the 6712 pad shape. Type "6712" into the search box on the upper left of our site to see all our pad options for this caliper.***

This ultra low profile six piston caliper still fits in 15 inch wheels in same manner as our four piston units do. The DP6 marks a noteworthy step in the evolution of the DynaPro caliper series. DP6 calipers offer the performance advantages of a larger pad and a six piston differential bore configuration, with complete bolt-on interchange ability with existing Good-Win Racing Miata Big Brake kits.

As with the previous DynaPro models, the strength of the DP6 is a combination of process and design. Premium grade alloy billets are stress-flow forged resulting in a highly efficient, high strength body. Stress flow forging re-aligns the internal grain structure of the metal within the contour of the caliper body. This process is proven to provide superior strength over any other process derived from castings or straight billet block machining. FEA assisted solid modeling design technology was employed to find the optimum balance between lightweight with superior strength against deflection.

In addition to the sturdy, yet stylish body, the DP6 incorporates race proven technology and the latest Wilwood performance enhancements. Pad clamping force is generated by six heavy wall STAINLESS pistons configured in a leading to trailing edge differential bore pattern. The heavy wall pistons have been re-engineered to fully resist backside deflection at high pressures while maintaining balanced pad loading for even wear over the length of the pad. Stainless steel resists corrosion while inhibiting direct heat transfer from the pads to caliper body, seals, and fluid. The DP6 uses the upgraded type 6712 pad that provide the larger overall volume size from the previous Dynalite and DynaPro four-piston models. The pads are retaining with exclusive Wilwood Quick-E clips for simplified pad service and maintenance without caliper removal. Stainless steel SRS bridge plates are used to dampen engagement harmonics, eliminate pad rattle, and protect the caliper bridges from gouging by the pad edges. Four corner bleeds and internal fluid passages accommodate front or rear mounting and simplified gas evacuation regardless of mounting position.

Standard DP6 calipers feature a high gloss black finish. Also available on request are bright polished (additional $30 per caliper) and high gloss red (additional $30 each).

*** Product images may differ from actual product appearance ***

REVIEWS

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.

Just wanted to thank you guys for the great stuff and great work done on my MX5 club yesterday. I could feel the difference in sound and performance right away! It drives and corners awesome now. Can't wait to tell my friends about you guys. I'll be keeping an eye on your web site for other goodies and events as well. Can't wait to try my new suspension out on a auto cross. Will definitely be trying it on some twisty roads this weekend. Just can't wipe that smile off my face when driving this car. Thanks again guys!

-- Paul Young