Miata 1990-2005: Brakes : Pads

Wilwood H Compound Miata BIG Kit Brake Pads (Four Piston)

Miata brake pads to fit our Miata brake kit only. This is the FULL RACE pad...noisy and dusty, NOT A STREET PAD. PolyMatrix "H" compound is about as close to a "run it every track" pad material that could possibly exist. Drivers are calling them the most driveable pads they have ever run. "H" compound is a high friction, long wearing material that is capable of withstanding the extreme sustained high temperatures found on hard braking short tracks and road courses

Customers who bought Wilwood H Compound Miata BIG Kit Brake Pads (Four Piston) also often bought:
	Wilwood E Compound Miata BIG Kit Brake Pads (four piston kits) Miata brake pads to fit our Miata brake kit. These have higher friction then the Q pads, and a higher temperature range as well. Of course, they produce more dust and won't last as long. Only fits our Big Brake Kit. PolyMatrix "E"... More Info
	COBALT XR3 CARBON-CERAMIC // WILWOOD BIG BRAKE KIT DYNALITE CP/12.5MM For all versions of our our Miata BIG BRAKE KITS! XR3 is a highly versatile medium-high torque compound with very good cold performance and high fade resistance. Excellent modulation and wear characteristics make the XR3 the perfect choice for the... More Info
	Wilwood clips The calipers come with single use cotter pins. We sell these reusable retaining clips for wilwood calipers to replace the cotter pin. Price is for two pins. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton