Miata 1990-2005: Wheels and Tires : Accessories

Grey anodized aluminum valve stems for 6UL wheels

Lightweight CNC aluminum alloy valves. These are top nut style to protect the valve from being damaged or unthreaded during mounting of stiff race tires. Less than half the weight of steel valves. Will not rust. Silver anodized, matches the lip of the silver 6UL. Laser etched 949 logo reputed to be worth 3hp, no really. 2 per 6UL wheel needed (8 for 4 wheels). This color is a great match for the Nickel finish

Customers who bought Grey anodized aluminum valve stems for 6UL wheels also often bought:
	Hubcentric Ring Set for wheel purchase today This is your choice if you are buying wheels today and do not know the size you need to fit your Miata - we will put in the correct set. Price is for set of four rings. More Info
	Goodwin Racing Miata Big Brake Kit--Caliper Pad Clips::All Wilwood Caliper clips replace the cotter pins that came with the calipers in our Miata Big Brake Kit and make quick change of pads a snap. The original cotter pins are NOT reuseable - these clips are reuseable. Sold as a pair. These look like thick... More Info
	Forged Team Dynamics Lug Nuts For the totally fanatical about unsprung weight we bring you the lightest lug nuts you will ever hold in your hand. 16 of these weigh a grand total of half a pound. Note that you should not use an air gun on forged aluminum lugs, hand tighten only. So... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton