MX5 2006-2012: Wheels and Tires : Accessories

Black anodized aluminum valves for 6UL wheels

Lightweight CNC aluminum alloy valves. These are top nut style to protect the valve from being damaged or unthreaded during mounting of stiff race tires. Less than half the weight of steel valves. Will not rust. BLACK anodized, matches the lip of the silver 6UL. Laser etched 949 logo reputed to be worth 3hp, no really. 2 per 6UL wheel needed (8 for 4 wheels).

Customers who bought Black anodized aluminum valves for 6UL wheels also often bought:
	BRONZE...6UL 15x8 pcd 4x100 +36 From our friends at 949 Racing comes this lightweight 12.6 lb race wheel, one piece cast construction. * Double valve design * JWL approved * Fits 205/50/ 225/45, 225/50, 245/40 * Cap included * Valves not included * Semi BRONZE... More Info
	Ground Control Miata Coilover Conversion 550/350::90-97 Adjustable coil-overs allow easy adjustment of Miata ride height and the ability to adjust the weight at each corner. With this simple sleeve design, any shock can now be a race ready coil-over. Ride height is adjustable from stock to 2" lower and... More Info
	Mazda Miata Brake Caliper REBUILT..RIGHT FRONT::94-00 Finding replacement calipers has always been a hassle. In the past the quality of rebuilt units was always suspect, or worse yet, scouring salvage yards for used ones. Mazda rebuilt calipers take the hassle and guess work out of replacing your calipers.... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton