Miata 1990-2005: Exhaust : Accessories

O2 Sensor bung

Standard M18x1.5 bung for O2 Sensor or Air/Fuel secondary O2 sensor, etc....needs to be welded to midpipe.

Customers who bought O2 Sensor bung also often bought:
	O2 Sensor bung PLUG ONLY Standard M18x1.5 plug for empty O2 Sensor bung holes. More Info
	Race Header O2 Wiring Kit::99-00 This Race Header Kit* is intended for the installation of a 1999-2000 Miata Racing Beat header into a California Emissions Equipped Model (CEEM). Several states now sell California emissions equipped models, to determine if your car is equipped with... More Info
	PowerFlex High Temp POLYURETHANE Exhaust Hangers::90-05 Factory exhaust hangers are made from a rubber compound containing natural products, which deteriorates with age. The bushings become softer and more pliable, and therefore becoming less capable of resisting the forces being placed on them. These... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton