Good-Win Racing Mazda Performance Parts

AWR "Autocross/Track" Heim HD link for aftermarket bars


Miata 1990-2005 · Suspension · Sway Bars

Part Number: 61-0476NB

Application: 1999-2005

Price: $95.00


AWR "Autocross/Track" Heim HD link for aftermarket bars
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

These AWR Front Heim HD endlinks include rubber bushings to keep chatter down that is common with Heim links. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. Similar to our race version but including bushing to reduce the "click-click" sound that comes from using our race version. Yes, proper LEFT and RIGHT threaded studs you can adjust length on the car WITHOUT having to disconnect links from the sway bar!

Solid links will make noise...some chatter inevitable even with the rubber O rings that we include. If you will be bothered by noise, select our PowerGrid links instead

*** Product images may differ from actual product appearance ***


I should thank you. The parts ordered have greatly enhanced my MX-5 and they were received well before I could have reasonably expected them. I'm an enthusiastic new customer. Regards, John

-- John W.

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.