Mazda6 2003-2012: Brakes

TECHNAFIT Mazda 6 Brake Lines

This stainless steel braided brake line kit comes complete with new banjo bolts and washers. The threaded hardline head is also on a swivel, so you never have to twist the line to thread it to the hardline. All of Techna-Fit's assemblies are assembled in-house, to stock specifications, meeting D.O.T. Certification. From auto enthusists to race car teams, Techna-Fit has what you are looking for with unbeatable prices and delivery time. FITS 2003-2008!

Customers who bought TECHNAFIT Mazda 6 Brake Lines also often bought:
	Mazda 6 Front Sway Bar 03-08 Mazda 6 Front Sway Bar - 2003-2008 4-Cylinder Models, MazdaSpeed 6 and 2003-05 V6 Models (Except 2006-08 3.0 V6 models) Racing Beat-designed sway bars reduce chassis roll in turns and increase your car's sensitivity to steering inputs, thereby improving... More Info
	Mazda6 Sway Bar Rear Upgraded Endlinks (Pair)::03-08 The addition of a larger aftermarket rear sway bar on the Mazda 6 can increase the stress loads on the original OEM sway bar endlinks. After receiving feedback about stock endlink ball joints that had been torn away from their sockets, Racing Beat decided... More Info
	Mazda 6 Rear Sway Bar 03-08 Designed as a partner for the Racing Beat front bar, the rear bar has been designed to work with the front bar to reduce chassis roll in turns and increase your car's sensitivity to steering inputs, thereby improving maximum cornering power.... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton