MX5 2006-2012: Suspension : Sway Bars

PowerGrid Miata Endlinks...>FRONT SHORT

The Powergrid Miata Endlinks incorporate adjustable THK resin ball-stud links. These are much like the factory style links in that performance is totally silent...yet range of articulation is greater than Heim links and length is adjustable. Waterproof seals! 50 degrees of articulation. This eliminates binding and allows for smooth load transitions.

Fits FRONT MX5. Price is per pair. These SHORT units are for LOWERED MX5s only.

Customers who bought PowerGrid Miata Endlinks...>FRONT SHORT also often bought:
	PowerGrid Miata Endlinks...>REAR The Powergrid Miata Endlinks incorporate adjustable THK resin ball-stud links. These are much like the factory style links in that performance is totally silent...yet range of articulation is greater than Heim links and length is adjustable. Waterproof... More Info
	Racing Beat Sway FRONT Bar -- NEW! Racing Beat-designed NC Generation MX5 Miata sway bars reduce chassis roll in turns and increase your Miata's sensitivity to steering inputs, thereby improving maximum Miata cornering power. Substantial engineering effort, select steel alloys, and precise... More Info
	RoadsterSport STREET SINGLE MX5 Miata Muffler...Just 10 pounds!::06-12 This MX5 Miata Muffler was designed for both RACING...and STREET. Our original RoadsterSport "RACE" Miata Muffler is an amazing 7 pounds and designed for the autocross and track MX5 Miata drivers who need to meet sound limits in the low 90 DB range with... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton