MX5 2006-2012: Suspension : Sway Bars

HOTCHKIS MX-5 Sport Sway Bar..REAR SWAY ONLY!!!

REAR ONLY... including bushings for install. Rear Sway Bar Features: - Lightweight, durable and adjustable 13/16" (21mm) hollow - 595% stiffer than the stock sway bar with a rate of 390 lbs/in - 745% stiffer than the stock sway bar with a rate of 470 lbs/in - 940% stiffer than the stock sway bar with a rate of 580 lbs/in - Easy to lubricate polyurethane bushings and heavy duty brackets with zerk fittings included

Customers who bought HOTCHKIS MX-5 Sport Sway Bar..REAR SWAY ONLY!!! also often bought:
	Steel and Polyurethane Motor Mounts....70 Durometer For the serious NC Miata performance enthusiast we bring you billet polyurethane motor mounts for the "NC" Mazda Miata MX5. The stock Miata soft engine mounts allow a great deal of motor movement...so much that autocrossers and track day racers have... More Info
	HEADER INSTALLATION LONG extension cord for second O2 Sensor....for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE. This is an option for the RoadsterSport header and Racing Beat Header and PPE LONG TUBE HEADER to allow relocation of your second factory O2 sensor to a position after the converter in a midpipe that so your installation is easy PLUG AND PLAY. Note that... More Info
	Lube OS Giken Limited Slip OS250R full synthetic Gear Oil was developed specifically for the OS Giken Super Lock differentials. 80W-250, 1 liter can More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton