Miata 1990-2005: Radiators, Cooling : Radiator

Koyo Drain Plug--

This is an aluminum drain plug for Koyo radiators. Great for replacement of stripped or leaking plugs. The standard one is plastic and can be easily stripped after many uses. This new aluminum one will last much longer. This will fit all Koyo radiators.

Customers who bought Koyo Drain Plug-- also often bought:
	Koyo Performance Radiator Cap Koyo designs its radiators to take all factory spec parts which means your factory cap will fit, and your factory plug will fit, and your factory fans will bolt right on. But for those who want an upgraded new cap to go with their new Miata Koyo... More Info
	Miata KOYO Radiator 37mm V1139 ALL Aluminum::90-97 Gain 50% capacity over stock Miata radiator! This miata radiator upgrade is completely plug and play with all OEM hardware including the stock fans and thicker aftermarket sway bars! We asked KOYO to make a unit slightly thinner Miata radiator than... More Info
	Miata Radiator KOYO 37mm Aluminum..V2277::99-05 This Koyo Radiator fits 99-05 Miata ONLY. This is Koyo's ALL ALUMINUM Miata Racing Performance Radiator. Produced in Japan, its all aluminum construction is held to tight quality control standards that are illustrated in the outstanding Heliarc... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton