MX5 2006-2012: Suspension : Bushings

I. Powerflex Polyurethane Bushings - Rear Upper Forward Link - Inner Pair :: 2006-2012

I. Powerflex Polyurethane Bushings - Rear Upper Forward Link - Inner Pair. Powerflex polyurethane bushings are 25%-30% stiffer than the factory bushings and do not deteriorate in performance over time. The benefit of the increased stiffness is superior control of the suspension components giving you more control over your Miata.

Customers who bought I. Powerflex Polyurethane Bushings - Rear Upper Forward Link - Inner Pair :: 2006-2012 also often bought:
	G. Powerflex Polyurethane Bushings - Rear Link Arm Inner - Pair::2006-2012 G. Powerflex Polyurethane Bushings - Rear Link Arm Inner - Pair Powerflex polyurethane bushings are 25%-30% stiffer than the factory bushings and do not deteriorate in performance over time. The benefit of the increased stiffness is superior control of... More Info
	F. Powerflex Polyurethane Bushings - Rear Control Arm Inner - Pair::2006-2012 F. Powerflex Polyurethane Bushings - Rear Control Arm Inner - Pair. Powerflex polyurethane bushings are 25%-30% stiffer than the factory bushings and do not deteriorate in performance over time. The benefit of the increased stiffness is superior control... More Info
	D. Powerflex Polyurethane Bushings - Rear Trailing Arm - Front Pair::2006-2012 D. Powerflex Polyurethane Bushings - Rear Trailing Arm - Front Pair. Powerflex polyurethane bushings are 25%-30% stiffer than the factory bushings and do not deteriorate in performance over time. The benefit of the increased stiffness is superior control... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton