MX5 2006-2012: Exterior

Good-Win NC Rear Spoiler---IN Fiberglass :: 06-10

OUT OF STOCK...in the process of changing to Urethane!

Aggressive looks and function! Fits Soft TOP ONLY! We made this for our track and autocross NC to reduce lift of the NC generation MX5 Miata at high speeds. Made to order in fiberglass for very low weight with great strength. Attaches to trunk lid, does not interfere with opening or closing your trunk.

Can be mounted as is, arrives in black MATTE FINISH fiberglass, or can be finished and painted.

Fits Soft TOP ONLY!

Customers who bought Good-Win NC Rear Spoiler---IN Fiberglass :: 06-10 also often bought:
	Cobalt 3-Point Shock Tower Brace::2006-2012 Oval section stainless steel tubing is mated to beautifully crafted tower supports. The welds on this brace are a work of art! Aside from the best craftsmanship available, this brace actually works. Patterned after Le Mans style chassis bracing, this... More Info
	HAWK HPS FRONT Pad Upgrade::06+ Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	Enkei RP-F1 17x8, 45mm offset 5x114, 15.6 pounds Two pounds LIGHTER than the stock rim but a full inch wider! Nothing else comes close to this combination of ultra light weight and strength (Rolling Rim technology used to make these rims results in grain alignment just like in forged wheels for greater... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton