MX5 2006-2012: Wheels and Tires : Wheel and Tire Combo Specials

STR Combo of 6ULR 17x9 Tungsten 48mm Offset, 18 Pounds Mounted and Balanced with TOYO R1R 235/40/17 :: 06+

Ultimate street grip for your MX5....great choice for those getting their feet wet in the new Autocross STR class or others who want super grip. Fits stock fenders on an NC with at least 1.0 degree negative camber (fits lowered and not lowered). We mount them, balance them on our top quality Hunter Mount and Balance setup and send them to your door ready to roll. INCLUDES hubcentric rings!

Customers who bought STR Combo of 6ULR 17x9 Tungsten 48mm Offset, 18 Pounds Mounted and Balanced with TOYO R1R 235/40/17 :: 06+ also often bought:
	McGard Spline Drive Lugs and Tool Set These are the patented design McGard Spline Drive lugs. Non-hex wheel lug which is both a light weight lug with more gripping surface area than the stock lug (to prevent lossening up under load), and a wheel lock. An MX5 takes 20 of these and ordering... More Info
	Voodoo Knob Magnum Pearl Finish Shifting pleasure....good fit. Note that we only sell the "magnum" version of the round which is not as big as it sounds and has the right weight to work just right. More Info
	RoadsterSport II Stainless Steel Duals for 06+ MX-5 Miata!::2006-2012 Our original duals for the 2006 and newer MX5 Miata was the best selling Miata exhaust by a good margin. Messing with the successful design to improve it was approached cautiously. We learned on the dyno in testing for our header that we had ideal flow... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton