MX5 2006-2012: Wheels and Tires : Wheel and Tire Combo Specials

STR Combo of 6ULR 17x9 Tungsten 48mm Offset, 18 Pounds Mounted and Balanced with TOYO R1R 245/40/17 :: 06+

Ultimate street grip for your MX5....great choice for those getting their feet wet in the new Autocross STR class or others who want super grip. Needs minor fender lip roll. We mount them, balance them on our top quality Hunter Mount and Balance setup and send them to your door ready to roll. INCLUDES FOUR 17x9 6ULR mounted and balanced with FOUR Toyo R1R 245/40/17 tires and hubcentric rings!

Customers who bought STR Combo of 6ULR 17x9 Tungsten 48mm Offset, 18 Pounds Mounted and Balanced with TOYO R1R 245/40/17 :: 06+ also often bought:
	HAWK HPS FRONT Pad Upgrade::06+ Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	Wilwood Brake Fluid::All Wilwood 570 Degree Brake Fluid,Wilwood's specially formulated Hi-Temp_ 570 Racing Brake Fluid has a minimum 570_ F dry bOiling point to withstand the severe heat requirements of automotive racing. Hi-Temp_ 570's low viscosity allows easy bleeding of your... More Info
	MX5 Miata Performance Billet Pedal Sets -- Manual with No Logo Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton