MX5 2006-2012: Exterior

MX5 Carbon Fiber Dash :: 06-08

Ready to make your MX5 into a hardcore and ULTRA light track machine? Ultra Light Carbon Fiber Dash. As used in our NC LIGHT project. For track MX5s only...not compatible with factory dash, airbags, etc.

Customers who bought MX5 Carbon Fiber Dash :: 06-08 also often bought:
	NC Oil Cooler Kit for MX5 Miata::06-08 Our MX5 Oil Cooler Kit is recommended for any track use. Includes hoses needed for hookup. This is a sandwich style cooler that circulates engine coolant through the adapter to cool your oil at the oil filter location. This Miata MX5 Oil Cooler Kit... More Info
	Steel and Polyurethane Motor Mounts....70 Durometer For the serious NC Miata performance enthusiast we bring you billet polyurethane motor mounts for the "NC" Mazda Miata MX5. The stock Miata soft engine mounts allow a great deal of motor movement...so much that autocrossers and track day racers have... More Info
	QUICK CHANGE Black MX5 SINGLE 2 Inch Hoop Bar--with Removeable REAR SUPPORTS.::06-12 This NC Miata Rollbar is 2.5 inches taller than the plastic covers that hide the wimpy factory Miata roll hoops, which means a full 3 inches taller than the factory bars within the plastic. Under the factory Miata roll hoop plastic is a wimpy factory... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton