Miata 1990-2005: Exterior : Rack and Hitches

Miata Drawbar

The Miata is low to the ground. Thus, if using the hitch for a trailer (instead of bike rack, etc), you may need to raise the trailer connection point with this Drawbar. For all hitches w/ 1-1/4" receiver - 3-1/8" rise X 11-1/4" length - black powdercoat (does not include hitch ball or pin)

Customers who bought Miata Drawbar also often bought:
	Hard Dog Hideaway Vertical Receiver Hitch, Removable Receiver Included::90-97 Hard Dog hitches work great for bike racks, luggage carriers and small trailers. Features include: Standard 1 1/4" receiver Powdercoat finish Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than a Miata / MX-5 should... More Info
	Hard Dog Hitch::90-97 Hard Dog hitches work great for bike racks, luggage carriers and small trailers. Features include: Standard 1 1/4" receiver Powdercoat finish Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than... More Info
	Factory Style Front Air Dam::90-97 Stylish air dam captures the form and function of your Miata. Molded from ultra tough polyeurathane for strength and flexibility. The front air dams not only look great but help your Miata stick to the road at speed. Parts supplied in ready to install... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton