MX5 2006-2012: Exterior

Miata Drawbar

The Miata is low to the ground. Thus, if using the hitch for a trailer (instead of bike rack, etc), you may need to raise the trailer connection point with this Drawbar. For all hitches w/ 1-1/4" receiver - 3-1/8" rise X 11-1/4" length - black powdercoat (does not include hitch ball or pin)

Customers who bought Miata Drawbar also often bought:
	Racing Beat Sway Bar Endlinks - Front or Rear::90-97 Adjustable HD (Heavy Duty) Sway Bar Links 1990-97 (Front and Rear) These Racing Beat-designed are a direct swap with the Miata factory links and provide the performance enthusiast the ability to set either front or rear sway bars to a "neutral position"... More Info
	Racing Beat Sway Bar Brace Kit - Front Developed to stiffen any Miata chassis, this assembly proves most beneficial when using any relatively strong aftermarket sway bar, including Racing Beat's tubular bar. This kit both effectively minimizes chassis flex that reduces sway bar performance... More Info
	Plush Floor Mats - Black/Red M::90-04 You'll want to drive barefoot, all the time, upon installing a pair of our plush floor mats. Mats are constructed from thick, dense pile carpet with a heavy rubber ribbed backing to keep them securely in place. All edges are bound in color matched... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton