Miata 1990-2005: Clutch, Flywheel, Drivetrain

ACT Clutch SPRUNG Disc 4-Puck Race :: 94-05

This is ONLY the Sprung Four Puck Disc for FIVE speed transmission. Used in Spec Miata and other track Miatas.

Customers who bought ACT Clutch SPRUNG Disc 4-Puck Race :: 94-05 also often bought:
	Miata Header Heatshield Blanket--New UPDATED VERSION NEW version shown on the RIGHT. This updated Miata Header Heat Shield has been improved with an additional layer of fiberglass mat and increased in size by about 20% so it works better with the Racing Beat header and the NC cars. It also works well on... More Info
	Miata TDR Radiator Heat Shield::90-97 Increase your cooling efficiency and dress up your Miata. The TDR radiator cowl covers the area between the bumper and the radiator forcing incoming air through your radiator instead of letting it escape over the top. All aluminum construction with a... More Info
	Performance Silicone Hose Kit by Samco-BLUE::94-97 Samco Sport Hose Kits provide a unique opportunity to upgrade your engine hoses to a product that is simply unrivalled in the world today for performance and looks. The Samco Sport Hose Kits are designed to replace original equipment hoses. Superb... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton