Miata 1990-2005: Clutch, Flywheel, Drivetrain

ACT Clutch SOLID Disc 4-Puck Race :: 90-93

This is ONLY the SOLID Four Puck RACE Disc for FIVE Speed Only. Used for Spec Miata and other Miata track cars.

Customers who bought ACT Clutch SOLID Disc 4-Puck Race :: 90-93 also often bought:
	Miata Clutch Throwout Bearing 90-05 Normally, a Miata throwout bearing does not require replacement unless it has been "abused" or is noisy during clutch engagement and/or disengagement. If there is any roughness during inspection, this is good cause for replacement. From an "insurance"... More Info
	Braided Stainless Steel Clutch Line::90-94 Our high performance stainless braided clutch line offers superior performance, longer life and better pedal feel since OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this line is a must for any clutch system. More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton