Miata 1990-2005: Clutch, Flywheel, Drivetrain

ACT ZM1-HDR4 Spec Miata Clutch :: 90-93

This is a Spec Miata Clutch...NOT for your street Miata! Complete kit including HD pressure plate, throwout bearing, pilot bearing, and SOLID FOUR PUCK HD DISC. SFI Certified to Ensure Safety

Customers who bought ACT ZM1-HDR4 Spec Miata Clutch :: 90-93 also often bought:
	Steel and Polyurethane Motor Mounts....95 Durometer For the serious NC Miata performance enthusiast we bring you made to order custom polyurethane motor mounts for the "NC" Mazda Miata MX5. The stock Miata soft engine mounts allow a great deal of motor movement...so much that autocrossers and track day... More Info
	Exedy Lightweight Racing Miata MX5 Flywheel...::2006-2012 EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance air flow to improve the... More Info
	Techna-Fit MX5 Miata Stainless Steel Brake Lines::06+ Our Techna-Fit MX5 brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM MX5 rubber lines expand. All of... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton