RX8 2004-2011: Wheels and Tires : Accessories

Blox Forged Aluminum Lug Nut Set - Black 12 x 1.5MM (20 PC. SET) Black Color

Blox Racing Lug Nuts are made with forged AL 7075 aluminum/magnesium alloy for the ultimate in weight savings without any compromise to strength.

The straight-through design allows BLOX extended wheels stud to be used for optimum performance. Each Lug nut weighs approximately 26.5g and is available in thread pitch size of 12x1.5mm. Open end design, compatible with open end lug nuts.

Customers who bought Blox Forged Aluminum Lug Nut Set - Black 12 x 1.5MM (20 PC. SET) Black Color also often bought:
	NEW BLACK ENKEI PF01 18x9, 45mm, 5x114, The already popular Enkei PF01 is now available in Matte Black! With its light weight and durability, the PF01 continues to be the hottest race wheel this year. The Wheel has been embraced by professional race car drivers such as Rhys Millen, Dan... More Info
	AWR RX8 FRONT "STREET/Autocross/Track" Heim HD link for aftermarket bars Our AWR Front RX8 STREETable version Endlinks include rubber bushings to keep chatter down that is common with Heim links. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. ... More Info
	Racing Beat RX8 Dual Exhaust::2004-2008 The Racing Beat RX8 cat-back exhaust system is the perfect replacement for your stock RX-8 exhaust - a durable assembly offering a real horsepower gain over your stock unit. All 304 stainless steel for long term RX8 exhaust performance. Very mild sound. ... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton