MX5 2006-2012: Suspension : Shocks

SPORT FCM 58 RED/ 58 WHITE Bump Stop Kit for 06+ Miatas using Koni Sport and Bilstein Shocks :: 2006+

Did you know that Mazda designed the NC and RX-8 to corner on the bump stops like the earlier cars? Now you can eliminate the factory understeer!

Bump stop kits are based on your chosen spring rates, or check the application guide for our recommendations. We use high-quality materials in our stops to add suspension travel and comfort while maximizing grip and performance.

Sets are for all (4) corners, combining different densities front and rear to achieve proper neutral handling for your car

These are the SPORT version.

Customers who bought SPORT FCM 58 RED/ 58 WHITE Bump Stop Kit for 06+ Miatas using Koni Sport and Bilstein Shocks :: 2006+ also often bought:
	Progress Technologies MX5 Springs.::2006-2012 Progress MX5 Springs. The engineering staff at Progress has decades of experience in the design and tuning of performance suspension systems, including CART/Indy Cars, IMSA, SCCA, NASA, and SCORE competitors. These MX5 springs reflect their ability to... More Info
	MX5 Miata Performance Billet Pedal Sets -- Manual with No Logo Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the... More Info
	Racing Beat MX5 Miata Radiator Protective Screen MX-5 Radiator Screen (2006 and later). Originally developed for use on the RX-8, Racing Beat has adapted the Racing Beat radiator protective screen for use on the 2006 and later Mazda MX-5. Although Mazda positioned the radiator in a strategic position... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton