Miata 1990-2005: Engine : Hoses

Mazda Miata Silicone 2 Hose Kit, Black :: 90-93

Mizu Silicone 2 hose kits are made by combining three layers of high grade silicone and heat-resistant embedded fibers eliminating the likelihood of cracking and tearing of your hose. Mizu Silicone hoses are engineered to provide increased heat reduction and pressure resistance. Mizu Silicone hoses are designed and engineered for a direct OEM fit no modification needed. Mizu Silicone hoses are backed by Mizu's unparallel lifetime warranty. (Contains upper and lower radiator hose)

Customers who bought Mazda Miata Silicone 2 Hose Kit, Black :: 90-93 also often bought:
	Prothane Urethane Bushing Kit--::90-05 Prothane Urethane Bushing Kit, Black 88A Durometer. One of the components of your car that suffers silently with age is the rubber in the suspension bushings. Over time, they break down and allow more movement of the control arms. This makes your... More Info
	Quality Rubber Shift Boot - Large--::90-05 Torn rubber shift boots allow fumes and extra noise into the interior. If you have noticed a change for the worse in your Miata it is time to change one or both of the factory boots. The smaller, lower boot, sits on top of the transmission at the... More Info
	Hard Dog Bolt In Harness Bar The Bolt-In Harness Bar is designed for competition harness wrap-around shoulder strap attachment. Easily installed in all year model Miatas in conjunction with any version of The Hard Bar, Sport Bar or Hard Core Bar with the least amount of interference... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton