Good-Win Racing Mazda Performance Parts

Powerflex Urethane Suspension Bushings- Rear Toe Adjuster Inner Bushing

1993-1995

RX7 1979-1995 · Suspension


Part Number: 61-0885N

Application: 1993-1995

Price: $57.99

Quantity:

Powerflex Urethane Suspension Bushings- Rear Toe Adjuster Inner Bushing
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

This is Item #19 in the photo ONLY

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension for better handling, driver feedback, and tire wear. Powerflex uses premium polyurethane materials for minimal NVH (noise, vibration, harshness) and increased longevity over the stock rubber bushings. The quality of Powerflex products can be seen the moment you open the box: premium polyurethanes, detailed moldings, lube holding grooves and knurls, and 304 stainless sleeves. Each kit is supplied with a copper-based grease for extended squeak-free operation. In some applications, we have polyurethane engine/ drivetrain mount and reinforcements to reduce movement for better throttle response and more power to the wheels.

Powerflex bushings do not come in complete chassis kits. Our bushings come la carte to fit each customer's needs*. An automobile's bushings and mounts wear at different rates making "complete-kit" bushing sets unnecessary for most buyers. Many owners don't feel the need to replace every bushing at once, having only a particular location that needs attention. Replacing only the "weak links" in your car's suspension is a great way to tighten handling without stressing the budget.

Powerflex copper-based grease is supplied with every dynamic product. We suggest using only a copper-based grease for lubrication. Due to grooves and knurls cast into the material to hold the lubricant, bushings will rarely need re-lubing. We do not suggest using an "anti-seize" product for lubrication.

All Powerflex bushings are made in the UK and come with a 1 year, unlimited mile warranty.

*** Product images may differ from actual product appearance ***

REVIEWS

I got the oil cooler installed and I'm diggin' it! Thanks. (product # 10-10012)

-- Shon

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.