MX5 2006-2012: Superchargers and Turbos

Delta Force Commando Upgrade

The Delta Force Commando upgrade is for those who already have the interface programmer (mx-5) and need the additional capabilities of the Commando software full tuning package. The price is significantly lower since this is software only. For Mazda MX-5 owners you will receive the Moto-East version of the software/template. Please note a 32 bit OS (xp, vista, 7) is required. See our Delta Force Commando page for details.

Customers who bought Delta Force Commando Upgrade also often bought:
	AEM WIDEBAND GAUGE UEGO CONTROLLER 30-4100 A/F A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-channel wideband UEGO controller and gauge display into... More Info
	MX5 Miata Intercooled SUPERCHARGER Kit---Complete with MOTO-EAST Tune::06-08 Formerly sold under the "COSWORTH" name, and now sold under our name and reworked with the best calibration available (yeah, we tried them all). Our new Complete kit gives you all the hardware with a MOTO-EAST calibration and cuts the price! This... More Info
	RoadsterSport Stainless MX5 Miata Midpipe::06-12 Designed as a bolt-on replacement for the factory midpipe to carry the 2.5 inch outlet of the factory header, and our RoadsterSport and Racing Beat headers, all the way to your choice of any of our 2.5 inch inlet RoadsterSport mufflers. Also bolts up to... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton