RX8 2004-2011: Wheels and Tires : Wheels

NEW Enkei PF01 17x9, 48mm, 5x114 Silver...17.8 Pounds!

Another super LIGHT and STRONG Mazda Enkei wheel. FITS STOCK FENDERS! Note that if you use stock lugs on this wheel you WILL SCRATCH IT UP badly because of the narrow and deep socket pockets on this design. Therefore, we STRONGLY recommend our McGard Spline drive two piece lugs or, our Team Dynamics forged lugs, with this wheel. Center caps and racing valve stems included with this Enkei Wheel. Takes a 75/67mm hubcentric ring available separately on the website.

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton