RX8 2004-2011: Suspension

Drop Engineering Race Bushing Kits- Front Lower :: 03-10

Position: Front Lower
Material: Delrin

Drop Engineering Billet Bushings are the ideal replacement to stock OEM Rubber Bushings. Drop Billet Bushings are precision machined and molded using Delrin or UHMW material. Replacing your OEM bushings with top of the line Drop Engineering manufactured billet bushings will significantly reduce wheel hop and improve acceleration. Drop Engineering Billet Bushings will provide optimal performance for any vehicle.

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton