Miata 1990-2005: Wheels and Tires : Accessories

ARP Wheel Studs

Fits: 90-93 Miata Front AND REAR
94-05 Miata FRONT ONLY

Details: With a tensile strength of 190,000 psi, these heat-treated, cadmium-plated 8740 chrome moly wheel studs are a necessity for any car in competitive racing. They easily handle tremendous acceleration shock loads (shear) and lateral forces (elongation).

.507'' Knurl Wheel Studs
12mm x 1.5
2.750" long
4 per package

Customers who bought ARP Wheel Studs also often bought:
	Hawk Blue Brake Pad Set - FRONT::90-93 For track duty! Not a street pad! Temperature range 500-1000 degrees. Hawk recommends if another brand of carbon pad has been used on rotors previously, before using any Hawk compound pads, resurface or replace the rotors. More Info
	HAWK HPS FRONT Pad Upgrade::06+ Step up from your standard factory Miata brake pads with a little more bite and yet still very friendly to rotors and low dust and low noise. These Miata brake pads are great choice for 06 and newer MX5 Miatas. More Info
	ARP Wheel Studs Fits: 94-05 Miata REAR ONLY Details: With a tensile strength of 190,000 psi, these heat-treated, cadmium-plated 8740 chrome moly wheel studs are a necessity for any car in competitive racing. They easily handle tremendous acceleration shock... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton