Miata 1990-2005: Brakes : Rotors

Brembo Sport Cross Drilled Solid Disc Rotors :: 90-93

Rear Axle- Solid Disc

With Brembo Sport Cross Drilled Rotors you can find both an introductory performance solution combined with an appealing aesthetic application.

The Brembo Sport Brake Systems consist of a set of 1-piece drilled rotors built to your original manufacturers requirements.

Reuse you stock calipers for true bolt-on performance!

ALL BREMBO CROSS DRILLED ROTORS ARE SOLD AS MATCHED SETS ( PAIRS ) BOTH LEFT AND RIGHT ROTORS FOR EITHER FRONT OR REAR POSITION

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton