Miata 1990-2005: Suspension : Bushings

Energy Suspension Control Arm Bushing Set- Front BLACK :: 90-97

Color: Black
Position: Front
Fits Into The Remaining Stock Control Arms
Full Floating And Non Binding
Maintains Better Alignment While Driving

Customers who bought Energy Suspension Control Arm Bushing Set- Front BLACK :: 90-97 also often bought:
	ACT Stage 1 HEAVY DUTY Organic Clutch Kit --ZM1-HDMM::90-93 We carry two Miata clutch stages depending on your Miata's torque requirements. This one is good for torque of 200 and then some. The rule of thumb we use is that for 12 psi or less on the 1.6 engined Miata this works great. For more than 12psi in... More Info
	Racing Beat Sway Bar Endlinks - Front or Rear::90-97 Adjustable HD (Heavy Duty) Sway Bar Links 1990-97 (Front and Rear) These Racing Beat-designed are a direct swap with the Miata factory links and provide the performance enthusiast the ability to set either front or rear sway bars to a "neutral position"... More Info

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton