Miata 1990-2005: Exterior : Body-Styling

Genesis Technologies Carbon Fiber Hood Louvers- Narrow : 90-05

The Carbon Fiber Hood Louvers are designed to efficiently move air out from the engine compartment to help reduce engine temperatures and aerodynamic lift from the vehicle.

Narrow Hood Louver Specs: 2" narrower than the Wide Louver for those tight fit locations. .25 lbs 20" x 9.5" Overall Size 17" x 6.5" Louver Opening 5 Slots

Installation Instructions

Re: Installing/upgrading Engine Mounts

Thanks to Cyberbug for his R&R tips, I was able to accomplish this quickly today and have a write-up here:http://www.billswebspace.com/miata.html ... ...
Posted by wrh3

Re: NC Coilover Install....OHLINS, JIC, etc...

Thank you morrisg. This is what I wanted to hear.
Posted by Burton

Re: NC Coilover Install....OHLINS, JIC, etc...

Sounds like you set the Ohlins up correctly with the 198mm measurement for the spring perch. If you are using the Ohlins supplied 4kg/mm springs for the rears...
Posted by morrisg

Re: Installing/upgrading Engine Mounts

I had only that day to work. The bolts in question (on top of the old mounts) can only be accessed with the car up on jackstands.Also, the lack of a suggested ...
Posted by hhowey

Re: NC Coilover Install....OHLINS, JIC, etc...

Quote:WARNING...you do NOT adjust height on the Ohlins or JIC by cranking the spring perches up against the spring tension and doing so can DAMAGE YOUR ...
Posted by Burton