Good-Win Racing Mazda Performance Parts

Marrad Miata Seat



Miata 1990-2005 · Interior · Seats and Covers

Part Number: 61-1084

Application: 1990-2005

Price: $749.00


Marrad Miata Seat
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

When the rear cushion is in place our seat should sit slightly lower than stock when using the lowest side mount setting. Using other settings will raise the height if preferred. Removing the rear cushion will provide the results in the broomstick test above. The shell was approximately 5/8" off the floor. Sliding a magic marker between the seat and carpet was a tight fit. Bolting a seat directly to the floor will not gain much over this sliding design.

Each seat will be in cloth and include the hardware. There are three INCLUDED components to the installation hardware. - (1) the mounting brackets to the floor, (2) sliders, and (3) side mounts between the sliders and one seat. Seat weighs 16 pounds, price is per seat and comes complete with all mounting brackets, sliders, and side mounts 27 lbs.

Below are some pictures of a prototype shell and the results of a broomstick test in a 1994 with a Hard Dog Hard Core Double Diagonal bar. The sub belt opening had not yet been added but will come standard in the seat. As you can see in the covered seat above, see changed the pitch of the side bolster for increased support once we saw how low the seat sat in the car.

These are custom seats, MADE TO ORDER....please allow 4 weeks for construction and please email us the exact YEAR OF YOUR MIATA. Thanks

INSTALL NOTES: When the brackets are assembled the bolts attaching the side mounts to the sliders are left loose enough to adjust the seat side to side....but obviously they need to be tightened before the seats are used. The front ones are easier to get to since the rake of the seat creates a gap above them. They can be tightened first in the car. It is easiest to remove the rear bolts attaching the side mount brackets to the seat and lift the seat upward to tighten the rear slider bolts.


Measurements on old version above, below is NEW Mid-2014 version! Lap belt openings now included! The mounting hardware now includes floor mounting brackets, dual locking sliders, side mounts and crossbar with seat belt buckle attachment location. The pricing on cloth seats increased...but well worth these upgrades for a COMPLETE setup!

*** Product images may differ from actual product appearance ***


Brian, just wanted tyou to know you've got another highly satisfied customer. I got my RoadstersportIII muffler on Friday, installed it in 20 minutes, looks and sounds awesome. I like the baffles out!! My new tires/wheels came Saturday, just got them on and test drove them. Fantastic!! And how they look--- just what I was after. I will add the front "mud flap" that looks like the rear one, for some stone protection, but the offset was just what I was working for. I'd love to send you some pictures for your photo gallery. If you'll send an adress via e-mail, I'll send some high-res photos showing clearances and side profiles, etc. The graphite spokes and polished rims really set well on my black car. Thanks again, me and my wallet will be back!!

-- Ken

The Konig Lightspeeds are incredible. Perfect and the best price in the market. Thanks Chris and Robbie