Thank you. You have rated this product.
WHY? You want the best Miata wheel for your money!
HOW? Flow forming...because it gives us a STRONGER product than other casting methods with a strength level that otherwise requires forging...but at much lower cost than forging.
WHAT? The best combo of WEIGHT, STRENGTH and PRICE you will find in a Miata wheel. You get a 15x8 that is only 12 pounds....yet has a load rating of 500 KG.....and you get it for less cost than anybody else can give you those three things!
* 15x8 4x100
* +25 offset
* 12 lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Clears our BIG BRAKE KITS!
* Fits 205/50/15, 225/45 tires.
Always check clearance during install and after car is lowered to the ground, failure to do so can result in damage, death, tires cut on fender lips, and other bad stuff! Takes optional 73/54mm hubcentric rings also available on this website.
Tire Size breakdown:
205/50 fits NB fenders, fits NA fenders with mild fender lip roll and 1.2 negative camber or better.
-225/45: Tires fit NB fenders with no mods needed given 1.5 negative camber or better, fits NA with slightly rolled fenders with that same negative camber or better
- 205/50 may require rolling fenders with this offset, depending on such variables as camber setting and amount of lowering (more lowering gives access to more negative camber and makes the fitment easier).
BRIAN'S APPLICATION NOTES: Never thought I would see a flow formed 15x8 at this price range, an amazing mix of STRENGTH, ULTRA LOW WEIGHT, and PRICE!
Note we recommend our numerous upgraded lug choices with any of our new wheels. Unlike the short and fat stock lugs that will likely result in scratching new wheels, all our replacement lugs have the socket tool bottom on the lug rather than the wheel surface, and are longer for more engagement with stud surface so they also stay tighter.
* Free shipping offers apply only to destinations within US Lower 48.