Good-Win Racing Mazda Performance Parts

OE Factory Mazda Tire Sensors and GS1D-37-141A - Set of 4



Miata MX5 2006-2015 · Wheels-Tires · Accessories

Part Number: 61-1498

Application: 2006-2012

Price: $225.00


OE Factory Mazda Tire Sensors and GS1D-37-141A - Set of 4
rating (0 Ratings)
rating (0 Ratings)

Thank you. You have rated this product.

Please include your VIN number at check out so the correct sensors will arrive.

For those buying new wheels and tires here and your MX5 comes with Tire Pressure Monitors, we proudly offer a full set of sensors that will mate perfectly with your new wheels...and your Miata. We use these same sensors in our own 2012 Mazda MX5

Here is the reset procedure.

1. Inflate all tires to pressure indicated on tire placard (inside your driver's door).
2. Turn ignition to ON, then to OFF.
3. Wait 15 minutes.
4. Drive vehicle above 12mph for several minutes.
5. Sensor IDs will then register automatically. Price for full set of four sensors.

*** Product images may differ from actual product appearance ***


I got the oil cooler installed and I'm diggin' it! Thanks. (product # 10-10012)

-- Shon

After reading many other positive reviews on both the GWR and Miata forums I finally decided to buy this product. My main concern for many months was whether or not I was up to the task of installing the header. But with the excellent instructions on Brian's forum as well as several Miata forum threads it turned out easier than I expected. After receiving notice that the header would arrive on a Friday afternoon, I began the disassembly process. After about 3 hours I had the stock manifold out. Later that afternoon the new catted header arrived right on schedule. And it is a thing of beauty. I opted for the stainless version. Installation on Saturday morning took another 3 hours, although I could have shaved some time off of that but I was actually enjoying the process of double checking torque values and cleaning up my engine compartment. I already have the GWR catted midpipe, so that connection was a snap. I put everything back together, reconnected my battery, and went for a drive. NO CODES! Nice throaty sound with my RSII muffler, and a significant boost in power and low/mid torque. Another happy camper here. I since have added a M-E tune and I feel I have realized all of the gains that Brian has achieved on his 2012 project Miata. I've put several hundred miles on my Miata since the install with zero problems. This is the car that Mazda should have built all along. Thanks Brian.

-- Ron P.