Compatible with the GTC-200 wing for the Miata.
This wing is hot. Suggest a tailor's measuring tape (one that is just like a rope) since the NC trunk contours downwards. Very easy install. Suggest building the brackets off the car and slide them through trunk, get lock nuts down to barely touching trunk bottom, then slide the wing on, do same (lock nuts barely touching) to the wing mounting to bracket, then tighten the bracket to trunk bolts down, then the wing to bracket bolts down.
DO NOT FORGET THE LITTLE GASKETS THE KIT PROVIDES YOU!!!!!!!! :)
I have the risers, also install these onto the brackets off the car (which I highly suggest, gives the wing WAY more useable downforce)
MEASURE 3 TIMES DRILL/CUT ONCE. Instructions say to drill with a 7mm, as always purchase a center punch ($4 from Harbor Freight) and drill a pilot hole first. Start with 1/4" or 3mm. The NC trunk is VERY thin. Any drill can do it.
Want to Review This Product?
(You must be logged in as a Good-Win-Racing Member. Join Now. It's Free!)